PNL-GTWY-010V-3STGCC Series
0-10V to 3-Stage Contact Closure Interface
Converts a 0-10V analog dimming signal into three dry contact relay outputs (Raise, Lower, Stop) for controlling motorized shades, with built-in staging logic that eliminates the need for an external controller.
Key Features
- Accepts 0-10VDC analog input (sink or source) with 100k ohm input impedance
- Three SPDT dry contact relay outputs: Raise, Lower, Stop
- Pre-programmed staging logic — no software, no external controller
- Relay contacts rated 2A at 24VDC / 0.5A at 120VAC resistive
- 120VAC to 24VDC Class 2 power supply included
- Compact 6x6x4 inch NEMA 1 steel enclosure with knockouts and screw cover
- DIN-rail mounted components for clean, serviceable layout
- UL Listed
Technical Specifications
| Specification | Details |
|---|---|
| Input Signal | 0-10VDC analog (sink or source), 100kΩ input impedance |
| Outputs | 3x SPDT dry contact relays (Raise, Stop, Lower) |
| Relay Ratings | 2A at 24VDC / 0.5A at 120VAC resistive |
| Power Supply | 120VAC input to 24VDC output, 10W Class 2 |
| Enclosure | 6H x 6W x 4D inches, steel, screw cover, surface mount |
| Enclosure Rating | NEMA 1 (indoor) |
| Operating Temp | -4°F to +122°F (-20°C to +50°C) |
| Compliance | UL Listed |
Ordering Information
PNL-GTWY-010V-3STGCC-120V-NEMA1 0-10V to 3-Stage Contact Closure Interface, 120VAC, NEMA 1 enclosure. Contact sales@nuvospec.com or (512) 615-9002 for pricing.
Typical Applications
- Lighting control systems with 0-10V outputs driving motorized shades
- DALI or 0-10V dimmer panels integrated with shade motors
- BMS and building automation shade integration via dry contacts
- Conference rooms and offices with automated daylight harvesting shades
- Any project where a lighting controller needs to trigger Raise/Lower/Stop shade commands
Get a Quote
Contact us for pricing and lead times on 0-10V to 3-Stage Contact Closure Interface.
Request a QuoteFind a RepWhy Nuvospec
- Pre-programmed logic means zero configuration — connect wires and it works
- No external controller, no software license, no commissioning laptop required
- UL Listed and built in a NEMA 1 steel enclosure — ready for inspection
- Dry contact outputs work with virtually any shade motor controller on the market
Ready to Get Started?
Contact us for a quote or to find your local representative.